STEINEL

:::This is Steinel

:::Sales Worldwide

:::Service

:::News

 
STEINEL
> Steinel> Sensor Systems > Sensor Technology for Professionals > Presence Detectors > LuxMaster Indoors > BLS
::: Sensor Technology for Professionals
:::Sensor Technology for Professionals :::Heat Tools for Professionals :::Sensor Technology for DIYers :::Heat Tools for DIYers
LuxMaster BLS

LuxMaster – Classic Lighting Managers

Lighting conditions tailored to requirements, at all times and to a system: LuxMaster takes care of lighting management for larger-type rooms. The multisensor system creates optimum lighting situations. This enhances a sense of well-being, boosts productivity and brings down energy costs. Three interconnected pyro-detectors register the presence of persons. Geared to the light sensitivity of the human eye, a light sensor continually measures the ambient light level and co-ordinates it with the brightness setting. LuxMaster uses this as the basis for calculating the lighting required and the intensity of light from the connected light sources. Providing 1320 switching zones for high detection accuracy and a reach of 12 m, LuxMaster is the ideal manager for a whole host of rooms. Conveniently operated by remote control, it guarantees optimised lighting conditions.

Benefits

  • 1320 switching zones
  • Generous reach of up to 12 m
  • Very high switching capacity
  • Automatically switches light 'ON' and 'OFF' in relation to presence and ambient light
  • Integrated brightness control for a constant level of light (BLS D, BLS DF)
  • High energy savings of between 40 % and 70 %
  • Controls fl uorescent tubes, halogen lamps and fi lament bulbs without a problem
  • Fast installation
  • Can be remotely controlled (BLS DF)

LuxMaster_01en.jpg

LuxMaster_02en.jpg 

LuxMaster BLS is particularly recommendable for rooms that are only used for short periods. It switches light 'ON' and 'OFF in relation to the presence of persons and ambient brightness. 

  •  Perceives persons and ambient brightness
  • Activates light sources when needed

LuxMaster_03en.jpg

LuxMaster_04en.jpg

LuxMaster_05.jpg

LuxMaster BLS
EAN white
4007841 720414
Dimensions (h x w x d)120 x 120 x 66 mm
Output
- 2000 W max., VDE-tested (resistive load, e.g. fi lament bulb),
- 1000 W max. (low-voltage halogen)
- 1000 W max., VDE-tested (fl uorescent lamps with conventional ballasts, cos ϕ = 0.5)
- max. number of electronic ballasts: 16 x (1 x 36 W)
or 12 x (2 x 36 W)
or 12 x (1 x 58 W)
or 8 x (2 x 58 W)
A relay or contactor must be provided on the line side for high switching capacities
Voltage
230 – 240V / 50 Hz
Detection zone
360° with 180° angle of aperture

Recommended
installation heigh

2.5 m – 3 m ceiling height

Max. reach
12 m in each direction high-resolution close-up range:
4 m radius (person seated) reliable long-distance range:
12 m radius (person walking)
Sensor system
11 detection levels,
1320 switching zones
Switching threshold or
constant light level
20 – 1300 lux
Switching 'ON'
in response to detecting movement
Switch-off delay
4 min. – 30 min., pulse mode (approx. 2 sec.),
Long-term mode (approx. 2 h)
Enclosure
IP 20
Protection class
II
Amb. temp.
-20° to +50° C
Control signal
BLS D / DF;
1 – 10 V (50 electronic ballasts max.)
Accessories
EAN for BLS DF
Hand-held transmitter for setting switching threshold
4007841 720711

Subject to technical modifications.

Detection zone
Reach: 12 m Max. angle of coverage: 360° by means of 3 pyrosensors; light sensor measures ambient brightness
Multi-lens: divides detection zone into 11 levels and 1,320 switching zones
Shrouds: limit the angle of coverage to suit requirements

Setting capabilities
Brightness switching threshold: defi nes level at which light switches 'OFF'; test function for adjusting the detection zone
Automatic switch 'OFF': Margin of 4-30 minutes plus special 2-h mode; individually selectable adjustment at potentiometer
:::Contact :::Imprint :::Privacy Policy :::Home © 2010 STEINEL Vertrieb GmbH