 |
|
Presence Control PRO DUAL HF
|
|
|
Lighting automation perfected: Presence Control PRO DUAL HF TThis product uses high-frequency technology that differs from the one used by the Presence Control PRO HF 360: DUAL HF with dual directional characteristic. Landings in hotels, corridors in schools and offi ce buildings etc. are typical areas that lend themselves to automatic lighting control. But so far, there's been no sensor that could really cope with the job satisfactorily. That's a bold claim, but one that can be explained in physical terms. In corridors, most people walk towards the sensor (radially). Because of the direction they walk in, this is where infrared sensors installed at normal ceiling height are pushed to their limits because the probability of someone crossing 2 switching zones is rare and only happens late on. Attempts can be made to improve this situation by using special lenses, but at the end of the day it's the laws of physics that count. High-frequency technology, in contrast, even prefers a radial walking direction because the signal generated is even greater. The DUAL HF sensor is the fi rst system to be featured in our range that uses 2 special HF-sensors to watch over both directions in a corridor from the ceiling: providing reliable detection over up to 24 m! Truly unique! Reach can be proportionally reduced in both directions all electronically. This model is available in the COM1, COM1 AP, KNX, DALI and 1 – 10 V DIM connecting options.- Ideal corridor sensor using high-frequency technology
- Reliable detection over up to 20 m
- Reach electronically adjustable for both directions together
- Detection irrespective of temperature
- Ideal for detecting radial movement towards the sensor
- Ideal in corridors of normal ceiling height
(hotel landings, halls and passageways at home, etc.)
|
|
Presence Control PRO DUAL HF
| EAN COM1
EAN COM1 AP
EAN DIM
EAN KNX
EAN DALI
| 4007841 002978
4007841 590703
4007841 002985
4007841 002992
4007841 003005
| Dimensions (w x h x d)
| 120 x 120 x 76 mm
| Point of application
| inside buildings | recommended
installation height
| 2.5 m – 3.5 m ceiling height
| Detection angle
| 360° with 140° angle of aperture, also
through glass, wood and stud walls
| | Reach | 10 x 3 m max. in each direction,
electronically and infi nitely adjustable | Sensor system
| High-frequency 5.8 GHz, transmission power < 1mW | Functions set at
DIP switches
(KNX using ETS software)
| DIP 1 Normal / test mode
DIP 2 Semi-/ fully automatic mode
DIP 3 Pushbutton / switch mode
DIP 4 Pushbutton 'ON' / pushbutton 'ON'-'OFF'
DIP 5 Constant-lighting control 'ON'-'OFF' (DIM/DALI) | Parallel connections
| Master/slave
Master/master
| User-friendly
setting capability
| Teach-in (with optional RC3 remote control)
| Light-level setting
| 10 – 1000 lux, ∞ / daylight
DIM 100 – 1000 lux
| IP rating
| IP 20 (IP 54 with AP Box)
| Safety class
| II
| Temperature range
| 0° C to +40° C
| Housing
| UV-resistant, paintable
| Accessories
EAN
EAN
EAN
EAN
EAN
EAN
EAN
EAN
EAN
| - RC3 service remote control
4007841 000387
- RC4 DIM remote control
4007841 003012
- RC5 DALI remote control
4007841 592806
- RC6 KNX service remote control
4007841 593018
- RC7 KNX remote control
4007841 592912
- Surface-mounting adapter Control PRO AP Box
4007841 000363
- Guard cage
4007841 003036
- Surface-mounting adapter Control PRO AP Box
KNX/DALI
4007841 003029
|
| Subject to technical modifications. |
Interfaces
|  |
|
|
Detection zone | |
 | | Max. reach: 3 –10 m in each direction, infi nitely adjustable | |
 | | Our high-frequency sensors operate at 5.8 GHz and < 1 mW. | |
Accessories | |
 | | Service remote control RC3 RC6 KNX | |
 | | Remote control RC5 DALI RC7 KNX | |
 | | Surface-mounting adapter Control PRO AP Box (IP 54) | |
 | | Surface-mounting adapter Control PRO AP Box KNX, DALI | |
|
|
|
|
|
|
|
