1. Important product
information
Please read carefully and keep in a safe
place.
– Under copyright. Reproduction either in whole
or in part only with our consent.
2. General safety precautions
Risk of electric shock!
230 V means danger to life!
• Disconnect the power supply before
attempting any work on the unit.
• During installation, the electric power cable
being connected must not be live. Therefore,
switch off the power first and use a voltage
tester to make sure the wiring is off-circuit.
• Installing the unit involves work on the mains
power supply.
This work must therefore be carried out professionally
in accordance with national wiring
regulations and electrical operating conditions.
(e.g. DE - VDE 0100, AT - ÖVE / ÖNORM
E8001-1, CH - SEV 1000)
• Only use genuine replacement parts.
• Repairs may only be made by specialist
workshops.
3. Proper use
Light
– LED light with/without sensor for indoor and
outdoor wall mounting.
Camera LED light:
– Sensor-switched light with sensor for wall
mounting outdoors.
– Integrated camera and intercom system.
4. Electrical Connection
Important: Incorrectly wired connections will produce
a short circuit later on in the product or fuse
box. In this case, you must identify the individual
conductors once again and reconnect them.
A mains switch for switching the unit ON and
OFF may of course be installed in the mains
supply lead.
The light source in this luminaire cannot be
replaced. If the light source needs to be
replaced (e.g. at the end of its service life), the
complete LED light must be replaced.
5. Installation
• Check all components for damage.
• Do not use the product if it is damaged.
• When installing the unit, make sure the installation
site is not subject to vibration.
• Select an appropriate mounting location,
taking the reach and motion detection into
consideration.
Important:
The most reliable way of detecting motion is to
install the light with the sensor aimed across the
direction in which a person would walk and by
ensuring that no obstacles (such as trees and
walls, for example) obstruct the line of sensor
vision. Reach is limited when walking directly
towards the light.
6. Cleaning and Maintenance
The unit requires no maintenance.
Hazard from electrical power.
Contact between water and live parts can result
in electrical shock, burns or death.
• Only clean unit in a dry state.
Risk of damage to property!
Using the wrong detergent can damage the light.
• Clean unit with a moist cloth without detergent.
7. Disposal
Electrical and electronic equipment, accessories
and packaging must be recycled in an environmentally
compatible manner.
Do not dispose of electrical and
electronic equipment as domestic
waste.
EU countries only: Under the current European
Directive on Waste Electrical and Electronic
Equipment and its implementation in national
law, electrical and electronic equipment no longer
suitable for use must be collected separately
and recycled in an environmentally compatible
manner.
This is how you save.
Connected lighting – top-of-the-range pioneering lights.
