Interfaces - Open to all common networks.

STEINEL presence detectors are designed as team players.The are available either with COM1, COM2, DIM, DALI and KNX interfaces or in the form of an Impulser system which means they can easily be integrated as field devices in building-management systems. The interface to select depends on the applications that are planned. Presence Control PRO devices can be used for operating and controlling all sorts of different functions: not only for switching light ON and OFF automatically but also heating, ventilation and air-conditioning systems.
Controlling light as and when it is needed; pre-selected settings can be used for maintaining a constant level of lighting an a room - in relation to daylight. Apart from this, they can also provide surveillance-only functions.



COM1/COM1 AP

Voltage:

220 - 240 V, 50/60 Hz

Output:

Relay 230 V

Resistive load 2000 W max. (cos φ = 1)

Resistive load 1000 W max. (cos φ = 0,5)

Inrush current 800 A/200 μs max

30×(1×18W), 25×(2×18W)
25×(1×36W), 15×(2×36W)
20×(1×58W), 10×(2×58W)

Note: each electronic ballast has its own particular inrush current.
A relay or contactor must be provided on line side for higher switching capacities.


Time setting:
30 sec. - 30 min., pulse mode (approx. 2 sec.), IQ mode (automatic adjustment to usage profile)
COM2

Voltage:

220 - 240 V, 50/60 Hz

Output:

Relay 230 V

Resistive load 2000 W max. (cos φ = 1)

Resistive load 1000 W max. (cos φ = 0,5)

Inrush current 800 A/200 μs max.


30×(1×18W), 25×(2×18W)

25×(1×36W), 15×(2×36W)

20×(1×58W), 10×(2×58W)


Note: each electronic ballast has its own particular inrush current. A relay or contactor must be provided on line side for higher switching capacities.

Output - switching contact 2:

Presence

230 W max. / 230 V

1A max. (cos φ = 1) for HVAC (heating/ventilation/air-conditioning)


Time setting for switching contact 1:

30 sec. - 30 min., pulse mode (approx. 2 sec.), IQ mode (automatic adjustment to usage profile)


Time setting for switching contact 2:Automatic room surveillance

0 sec. - 10 min. ON delay, 

1 min - 2 hrs. stay-ON time


DALI

Voltage:
220 – 240 V, 50/60 Hz


Time setting:

30 sec. - 30 min., IQ mode (automatic adjustment to the usage profile)


Control output:

DALI output 1: 2-core DALI control cable / broadcast

DALI output 2: 2-core DALI control cable / broadcast

Controllable DALI electronic ballasts:

12 DALI electronic ballasts per output 


Basic brightness:

0  sec.– 30  min.,  10–60 %  via  RC8

Constant-lighting control

DIM

Voltage:

220 - 240 V, 50 /60Hz

Output:

Relay 230 V

Resistive load 2000 W max. (cos φ = 1)

Resistive load 1000 W max. (cos φ = 0,5)

Inrush current 800 A/200 μs max.

0 x (1 x 18 W), 25 x (2 x 18 W)

25 x (1 x 36 W), 15 x (2 x 36 W)

20 x (1 x 58 W), 10 x (2 x 58 W)

Note: each electronic ballast has its own particular inrush current.A relay or contactor must be provided on line side for higher switching capacities.


Time setting:

30 sec. - 30 min., IQ mode (automatic adjustment to the usage profile)


Control output:

1 - 10 V, max. of 50 electronic ballasts (100 mA max.)

Basic brightness:
0 sec. - 30 min., 10-60% via RC8



KNX

Voltage:

30 V from KNX bus voltage

Settings
by means of ETS software, remote control or bus

Lighting channels Light 1 - Light 4
Switching/dimming, switching mode,
constant lighting control, stay-ON time

Basic brightness 
Permanently ON, 1–255 min, 10–50% = all night


HVAC output

depending on presence

Switch-ON delay 

Room surveillance, 0–255 min.

Stay-ON time 1 – 255 min.


Presence stay-ON time output 

1–255 sec. or  1–255  min.


Further outputs

Light level, sabotage protection