• STEINEL RS 200 C without motion detector, with Bluetooth
  • STEINEL RS 200 C without motion detector, with Bluetooth
  • STEINEL RS 200 C without motion detector, with Bluetooth
  • STEINEL RS 200 C without motion detector, with Bluetooth

LED indoor light without sensor

RS 200 SC

LED indoor light without sensor

RS 200 C without motion detector, with Bluetooth

EAN 4007841078775
  • Indoor light without motion detector, with high-quality anthracite-coloured aluminium housing
  • With pleasant ambient light for a beautiful room atmosphere, suitable for ceiling and wall mounting
  • Wireless networking via Bluetooth and easy setting via STEINEL Connect App
  • Functions: adjustable main light
  • Warm white light (3000 K) and long-life 17,1 W LEDs with 1165 lm
  • Incl. mounting accessories - plastic-free packaging
  •  
    Indoor highlight.
  •  
    Functions at a glance

Indoor highlight.

Premiere! The RS 200 C is the first Bluetooth-enabled STEINEL Connect indoor light to be featured in our Indoor range. This makes it easy to interconnect, set, adjust and operate via Bluetooth. No cables. Without stress. It's never been easier! Enclosed in a high-quality anthracite-coloured aluminium housing, the LED indoor light has a diameter of 26.2 cm, is 5.3 cm in height and makes classy design and lighting statements on ceilings and walls. At the same time, warm white ambient light in a colour temperature of 3000 K always conjures a pleasing room atmosphere. The innovative RS 200 C is also available with sensor.

Technical Specifications

Quick overview

Download datasheet
Application, place
Indoors
Installation
Surface wiring
With motion detector
No
Interconnection via
Bluetooth Mesh
Output
17,1 W
Luminous flux total product
1165 lm
Colour temperature
3000 K
Article number
078775
PU1, net weight
0,878 kg
53 263 263
long life LED 25.000 h
indoor
3000K warm-white
IP54
connectable via bluetooth
Settings via App
CE
Light source not exchangeable

General

With lamp
Yes, STEINEL LED system
With motion detector
No
Manufacturer's Warranty
3 years
Settings via
Bluetooth, Smartphone, Tablet
With remote control
No
Version
without motion detector, with Bluetooth
PU1, EAN
4007841078775
Application, place
Indoors
Application, room
stairwell, Indoors, function room / ancillary room, corridor / aisle, recreation room
Colour
Anthracite
Fuse protection B10
134
Fuse protection B16
215
Fuse protection C10
134
Fuse protection C16
215

Fixation/ mounting

Installation site
wall, ceiling
Installation
Ceiling, Wall

Housing

Impact resistance
IK10
IP-rating
IP54
Protection class
I
Ambient temperature
from -20 up to 40 °C
Housing material
Aluminium
Cover material
Plastic, opal

Electrical equipement

Mains power supply
220 – 240 V / 50 – 60 Hz
Power consumption
0,5 W
Output
17,1 W

Sensor technology

Mounting height max.
4,00 m
HF-system
5,8 GHz

Luminaire

Luminous flux total product
1165 lm
Total product efficiency
68 lm/W
Colour temperature
3000 K
Colour variation LED
SDCM3
Lamp
LED cannot be replaced
LED cooling system
Passive Thermo Control
Soft light start
Yes
Lifetime LED according to IEC-62717 (L70)
54000
Lebensdauer LED nach IES TM-21 (L70)
54000
Colour Rendering Index CRI
= 80
Photobiological safety in accordance with EN 62471
RG1

General information

Article number
078775
European Article Number (EAN)
4007841078775
Transmitter power
< 1 mW
Basic light level function in per cent
10 – 100 %

Functions

Twilight setting
2 – 2000 lx
Time setting
5 s – 60 Min.
Basic light level function
Yes
Basic light level function, detail
LED effect light
Basic light level function time
1-60 min

Connection

Interconnection
Yes
Type of interconnection
Master/master
Interconnection via
Bluetooth Mesh

General information

Product category
LED indoor light without sensor
Product Details
  • Image
    Interconnectable and adjustable via Bluetooth
  • Image
    Including STEINEL LED system
  • Image
    Intelligent soft light start (only with bluetooth sensor product)
  • Image
    High-quality aluminium
Downloads
Safety and Warning Instructions
1. Important product information
Please read carefully and keep in a safe place. – Under copyright. Reproduction either in whole or in part only with our consent.

2. General safety precautions
Risk of electric shock! 230 V means danger to life! Disconnect the power supply before attempting any work on the unit. During installation, the electric power cable being connected must not be live. Therefore, switch off the power first and use a voltage tester to make sure the wiring is off-circuit. Installing the sensor-switched light involves work on the mains voltage supply. This work must therefore be carried out professionally in accordance with national wiring regulations and electrical operating conditions. (e.g. DE - VDE 0100, AT - ÖVE / ÖNORM E8001-1, CH - SEV 1000) Only use genuine replacement parts. Repairs may only be made by specialist workshops.

3. Proper use
Sensor-switched wall/ceiling light with active motion detector. Limited suitability for outdoor use as a result of detection sensitivity.

4. Electrical Connection
Important: the light source of this luminaire cannot be replaced. If the light source needs to be replaced (e.g. at the end of its service life), the complete luminaire must be replaced. Connection to a dimmer will result in damage to the sensor-switched light. Note: do not make direct contact with the LED.

5. Installation
Check all components for damage. Do not use the product if it is damaged. When installing the unit, make sure the installation site is not subject to vibration. Select an appropriate mounting location, taking the reach and motion detection into consideration.

6. Cleaning and Maintenance
The unit requires no maintenance. Hazard from electrical power. Contact between water and live parts can result in electrical shock, burns or death. Only clean unit in a dry state. Risk of damage to property! Using the wrong detergent can damage the light. Clean unit with a moist cloth without detergent.

7. Disposal
Electrical and electronic equipment, accessories and packaging must be recycled in an environmentally compatible manner. Do not dispose of electrical and electronic equipment as domestic waste. EU countries only: Under the current European Directive on Waste Electrical and Electronic Equipment and its implementation in national law, electrical and electronic equipment no longer suitable for use must be collected separately and recycled in an environmentally compatible manner.
Manufacturer information
Manufacturer
STEINEL GmbH
Dieselstraße 80-84
33442 Herzebrock-Clarholz
Germany
product@steinel.de