1. Important product
information
Please read carefully and keep in a safe place.
– Under copyright. Reproduction either in whole or in
part only with our consent.
2. General safety precautions
Risk of electric shock!
230 V means danger to life!
• Disconnect the power supply before attempting any
work on the tool.
• Check the tool for any damage (power cord, housing
etc.) before putting it into operation and do not
use the tool if it is damaged.
• Do not expose electric power tools to rain. Do not
use electric power tools if they are damp and do
not use them in a damp or wet environment.
• Avoid coming into contact with earthed objects,
such as pipes, radiators, cookers or refrigerators.
• Do not carry the tool by the power cord and do not
unplug the tool by pulling on the power cord. Protect
the power cord from heat, oil and sharp edges.
Danger to children from tools, swallowed parts
and risk of burns!
• When not in use, tools must be stored out of
children’s reach.
• This tool may be used by children aged 8 or above
and by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge
if they are supervised and are given instructions
on how to use the tool safely and understand
the hazards involved. Do not allow children
to play
with the tool. Danger from swallowed parts and
risk of burns.
Beware of burns!
• The glue reaches temperatures of up to 200°C.
The nozzle also gets very hot while the tool is
being used.
• After skin contact with hot glue: immediately cool
with cold water. Do not try to remove hot-melt glue
from the skin. If necessary, seek medical attention.
• After eye contact with hot-melt glue: immediately
cool for approx. 15 minutes. with running water and
consult a doctor straight away.
• Do not pull glue sticks out of the applicator.
Danger from toxic gases and fire hazards!
• Toxic gases may develop when working on plastics,
paints, varnishes or similar materials.
• Do not use in the proximity of flammable materials.
Heat may be conducted to flammable materials that
are hidden from direct sight.
• Do not direct the tool at one and the same place for
a prolonged period.
• Do not use in the presence of an explosive
atmosphere.
• Only stand the tool on fireproof, non-thermally
conductive and stable surfaces. After use, set the
tool down on its standing surface and let it cool
before putting it away.
• Vapours may escape if the rechargeable battery
is used improperly or damaged. Seek medical
attention in the event of health complaints.
Danger from improper repair!
• This electric power tool complies with the relevant
safety regulations. Repairs should only be performed
by a qualified electrician. Otherwise the user
may be exposed to hazards.
• If this tool’s main power cord is damaged, it must
be replaced by the manufacturer or its customer
service department or a similarly qualified person so
as to avoid hazards.
Risk of damage to property!
• Do not leave the tool unattended while it is in
operation.
• For your own safety, only use accessories and
attachments that are specified in the operating
instructions or recommended or specified by the
tool manufacturer. The use of other attachments or
accessories may result in personal injury.
• Do not use liquid or pasty adhesives.
• Glue marks on clothing cannot be removed.
• Make sure heat-sensitive materials are suitable for
gluing with hot-melt adhesive.
• Drips of glue are best removed when cold.
• Hot glue running into the applicator may cause
damage.
• Always screw the nozzle tight after replacing it
(approx. 1 Nm).
• Use genuine replacement parts and genuine
accessories.
• Only use genuine STEINEL sticks.
3. Proper use
This electric tool is only intended for solvent-free
gluing of handicraft materials and model components
at home.
4. Cleaning and Maintenance
The tool requires no maintenance.
Hazard from electrical power.
Contact between water and live parts can result in
electrical shock, burns or death.
• Only clean tool in a dry state.
Risk of damage to property!
Using the wrong detergent can damage the light.
• Clean tool with a moist cloth without detergent.
5. Disposal
Electrical and electronic equipment, accessories and
packaging must be recycled in an environmentally
compatible manner.
Do not dispose of electrical and electronic
equipment as domestic waste.
EU countries only: Under the current
European Directive on Waste Electrical
and Electronic Equipment and its implementation in
national law, electrical and electronic equipment no
longer suitable for use must be collected separately
and recycled in an environmentally compatible
manner.
Versatile. Light. Compact.
Series 1 - Inspires DIY fans worldwide.
