• IR 180 AP easy Surface wiring
  • IR 180 AP easy Surface wiring
  • IR 180 AP easy Surface wiring
  • IR 180 AP easy Surface wiring
  • IR 180 AP easy Surface wiring

Motion detector

IR 180 AP easy

Motion detector

IR 180 AP easy Surface wiring

EAN 4007841066048
  • Infrared motion detector with 180° detection angle and up to 8 m detection range
  • For surface wall mounting indoors and outdoors (IP 54), for easy retrofitting to automatic light in new and existing buildings (For 2- and 3-wire installation)
  • Made of UV-resistant plastic for a long service life
  • Stepless adjustment of time (5 sec. - 30 min.) and switch-on brightness (2-1000 lux), teach function, push-button for use as conventional light switch
  • Reliably switches any light source with a total of max. 200 W switching load, connection of up to 4 LEDs possible
  • Incl. mounting accessories - plastic-free packaging
Contact Sales Team
  •  
    Hands full? Step into the light.

Hands full? Step into the light.

You come home from the supermarket and are get the shopping out of the car. Arms full, you take it into the pantry. Reliably, conveniently and without the need to touch it, the IR 180 AP easy automatically switches the light 'ON' and 'OFF' again as soon as you leave the room. The intelligent switch is particularly good for corridors, kitchens, guest WCs and other service rooms. Incidentally, installation couldn't be easier. Using it to replace your conventional switches is as easy as putting icing to a cake, whether as a 2-wire or 3-wire installation. Switches all lamp types.

Product Details
  • Image
    2 or 3-wire installation
Technical Specifications

Quick overview

Download datasheet
Application, place
Indoors, Outdoors
Installation
Surface wiring
Detection angle
180 °
Reach, tangential
r = 8 m (101 m²)
Mounting height max.
2,20 m
Version
Surface wiring
Article number
066048
PU1, net weight
0,199 kg
image/svg+xml 82 72 67
infrared sensor 180°
max. 8 m
long life LED 25.000 h
max. 2000 W
manual switch ON/OFF
Teach mode
IP54
2 - 1000 lux
5 sec - 30 min

General

Dimensions (L x W x H)
82 x 72 x 67 mm
With motion detector
Yes
Manufacturer's Warranty
3 years
Settings via
Potentiometers
With remote control
No
Version
Surface wiring
PU1, EAN
4007841066048
Type
Motion detectors
Application, place
Indoors, Outdoors
Application, room
corridor / aisle, function room / ancillary room, WC / washroom, outdoors, Indoors
Colour
grey
Colour, RAL
7035

Fixation/ mounting

Installation site
wall
Installation
Surface wiring, Wall

Housing

IP-rating
IP54
Protection class
II
Ambient temperature
from 0 up to 40 °C
Material
Plastic

Electrical equipement

Mains power supply
220 – 240 V / 50 – 60 Hz
Switching output 1, resistive
200 W
Switching output 1, number of LEDs / fluorescent lamps
4 stk.
Fluorescent lamps, electronic ballast
150 W
Fluorescent lamps, uncorrected
150 VA
Fluorescent lamps, series-corrected
150 VA
Fluorescent lamps, parallel-corrected
150 VA
Switching output 1, low-voltage halogen lamps
200 VA
LED lamps < 2 W
40 W
LED lamps > 2 W < 8 W
100 W
LED lamps > 8 W
160 W
Capacitive load in μF
132 µF

General information

Article number
066048
European Article Number (EAN)
4007841066048
Detection angle
180 °
Angle of aperture
90 °

Sensor technology

Technology, sensors
passive infrared, Light sensor
Mounting height
0,90 – 2,20 m
Mounting height max.
2,20 m
Optimum mounting height
1,1 m
Sneak-by guard
Yes
Electronic scalability
No
Mechanical scalability
No
Reach, radial
r = 3 m (14 m²)
Reach, tangential
r = 8 m (101 m²)
Switching zones
96 Schaltzonen

Functions

Twilight setting
2 – 1000 lx
Time setting
5 s – 30 Min.
Basic light level function
No
Main light adjustable
No
Twilight setting TEACH
Yes
Constant-lighting control
No

Connection

Interconnection
Yes

General information

Product category
Motion detector
Downloads
Sicherheits- und Warnhinweise
1. Important product
information
Please read carefully and keep in a safe
place.
– Under copyright. Reproduction either in
whole or in part only with our consent.
2. General safety precautions
Risk of electric shock!
230 V means danger to life!
• Disconnect the power supply before
attempting any work on the unit.
• During installation, the electric power cable
being connected must not be live.
Therefore, switch off the power first and
use a voltage tester to make sure the
wiring is off-circuit.
• Installing the unit involves work on the
mains power supply. This work must
therefore be carried out professionally in
accordance with national wiring regulations
and electrical operating conditions. (e.g.
DE - VDE 0100, AT - ÖVE / ÖNORM
E8001-1, CH - SEV 1000)
• Only use genuine replacement parts.
• Repairs may only be made by specialist
workshops.
3. Proper use
The sensor switches are equipped with
a pyro sensor which detects the invisible
heat emitted by moving objects (people,
animals etc.). The heat detected in this way
is converted electronically into a signal that
switches a connected load ON (e.g. a light).
4. Electrical Connection
Caution: reversing the connections may
result in damage to the unit.
Note: mixing up the connections will
produce a short circuit in the product or your
fuse box. In this case, you must identify the
individual conductors once again
and reconnect them.
5. Installation
• Check all components for damage.
• Do not use the product if it is damaged.
• When installing the unit, make sure the
installation site is not subject to vibration.
• Select an appropriate mounting location,
taking the reach and motion detection into
consideration.
6. Cleaning and Maintenance
The unit requires no maintenance.
Hazard from electrical power.
Contact between water and live parts can
result in electrical shock, burns or death.
• Only clean unit in a dry state.
Risk of damage to property!
Using the wrong detergent can damage
the light.
• Clean unit with a moist cloth
without detergent.
7. Disposal
Electrical and electronic equipment, accessories
and packaging must be recycled in an
environmentally compatible manner.
Do not dispose of electrical and
electronic equipment as domestic
waste.
EU countries only: Under the current
European Directive on Waste Electrical and
Electronic Equipment and its implementation
in national law, electrical and electronic
equipment no longer suitable for use must
be collected separately and recycled in an
environmentally compatible manner.
Manufacturer information
Manufacturer
STEINEL GmbH
Dieselstraße 80-84
33442 Herzebrock-Clarholz
Germany
product@steinel.de