• STEINEL XLED ONE XL S white
  • STEINEL XLED ONE XL S white
  • STEINEL XLED ONE XL S white
  • STEINEL XLED ONE XL S white
  • STEINEL XLED ONE XL S white
  • STEINEL XLED ONE XL S white
  • STEINEL XLED ONE XL S white
  • STEINEL XLED ONE XL S white
  • STEINEL XLED ONE XL S white

Sensor-switched LED floodlight

XLED ONE XL S

Sensor-switched LED floodlight

XLED ONE XL S white

EAN 4007841065270
  • Spotlight with motion detector for wall and ceiling mounting with floodlight-like illumination of large areas
  • Up to 50,000 hours LED lifetime (approx. 30 years at 4.5 hours/day)
  • Automatic light thanks to 180 ° Infrared sensor with up to 12 m detection of movement
  • LED panel as well as sensor can be swivelled vertically by 180°, incl. cover sticker for exact adjustment of the detection area
  • Warm white light (3000 K) with 42,6 W LEDs and 4200 lm, with an illumination of max. 300 sqm, max. 3m mounting height
  • Incl. mounting accessories
This product contains a light source of energy efficiency class E
  •  
    Powerful lighting in XL format.
  •  
    Series overview
Powerful lighting in XL format.

Warm white light at 3000 K and 4200 lm: the XLED ONE XL S wall and ceiling floodlights (42,6 W) provide bright, wide-area illumination around the home and garden. The LEDs achieve a lifetime of up to 50,000 hours – equivalent to approx. 30 years with a daily use of 4.5 hours. With the XLED ONE XL Sensor, an infrared sensor with a 180° angle of coverage and a range of up to 12 m automatically switches the light on as soon as motion is detected. The panel and sensor can be swivelled vertically by 180°. The lighting duration can be adjusted. The twilight setting can also be defined as required. The floodlight has IP44 protection.

Technical Specifications
Quick overview
Download datasheet
Application, place
Outdoors
Installation
Surface wiring
With motion detector
Yes
Output
42,6 W
Luminous flux total product
4200 lm
Colour temperature
3000 K
Article number
065270
PU1, net weight
1,396 kg
image/svg+xml 259 1000 222 356 215
long life LED 50.000 h
3000K warm-white
infrared sensor 180°
max. Ø 12 m
IP44
180° vertical
180° vertical
Light source not exchangeable
Control gear not exchangeable

General

Dimensions (L x W x H)
222 x 259 x 215 mm
With lamp
Yes, STEINEL LED system
With motion detector
Yes
Manufacturer's Warranty
3 years
Settings via
Potentiometers
Version
white
PU1, EAN
4007841065270
Application, place
Outdoors
Application, room
outdoors, courtyard & driveway
Colour
white

Fixation/ mounting

Installation site
wall, ceiling
Installation
Wall, Ceiling, Surface wiring

Housing

Impact resistance
IK03
IP-rating
IP44
Protection class
I
Ambient temperature
from -20 up to 40 °C
Housing material
Aluminium
Cover material
Glass transparent

Electrical equipement

Mains power supply
220 – 240 V / 50 – 60 Hz
Output
42,6 W

Sensor technology

Mounting height max.
3,00 m
Sneak-by guard
No
Capability of masking out individual segments
Yes
Electronic scalability
No
Mechanical scalability
No
Reach, radial
r = 3 m (14 m²)
Reach, tangential
r = 12 m (226 m²)
Optimum mounting height
2 m
Detection angle
180 °

Luminaire

Photo-cell controller
Yes
Luminous flux total product
4200 lm
Measured luminos flux (360°)
4200 lm
Total product efficiency
99 lm/W
Colour temperature
3000 K
Colour variation LED
SDCM3
Lamp
LED cannot be replaced
LED life expectancy (max. °C)
50000 h
Service life LED L70B50 (25°)
> 36000 h
Drop in luminous flux in accordance with LM80
L70B10
LED cooling system
Passive Thermo Control
Soft light start
No
Colour Rendering Index CRI
= 80

General information

Article number
065270
European Article Number (EAN)
4007841065270

Functions

Twilight setting
2 – 1000 lx
Time setting
5 s – 35 Min.
Basic light level function
No

Connection

Interconnection
No

General information

Product category
Sensor-switched LED floodlight
Product Details
  • Image
    Including STEINEL LED system
  • Image
    UV resistant material
  • Image
    High-quality aluminium
  • Image
    Suitable for mounting on ceilings
Downloads
Safety and Warning Instructions
1. Important Product Information
Please read carefully and keep in a safe place. – Under copyright. Reproduction either in whole or in part only with our consent.

2. General Safety Precautions
Risk of electric shock! 230 V means danger to life! Disconnect the power supply before attempting any work on the unit. During installation, the electric power cable being connected must not be live. Therefore, switch off the power first and use a voltage tester to make sure the wiring is off-circuit. Installing the LED floodlight involves work on the mains voltage supply; installation must therefore be carried out professionally in accordance with the applicable national wiring regulations and electrical operating conditions (e.g. DE - VDE 0100, AT - ÖVE/ÖNORM E 8001-1, CH - SEV 1000). Contact between water and live parts can result in electrical shock, burns or death. Light must not be wet-cleaned. Only use genuine replacement parts. Repairs may only be made by specialist workshops. The LED floodlight must be positioned so that it is not expected that anybody can stare into the light for any prolonged period from a distance of less than 0.3 m. The floodlight enclosure heats up when the light is on. Only adjust the angle of the LED panel once it has cooled down. Do not install the LED floodlight on normally flammable surfaces. The cable must not be replaced if it gets damaged. If the cable is damaged, you must replace the entire bracket floodlight with cable.

3. Proper Use
LED floodlight – Sensor-switched LED floodlight with/without sensor suitable for wall mounting outdoors. Camera LED floodlight: – LED floodlight with sensor suitable for wall mounting outdoors. – Integrated camera and intercom system.

4. Electrical Connection
Important: incorrectly wired connections will produce a short circuit later on in the LED floodlight or your fuse box. In this case, you must identify the individual conductors once again and reconnect them. The light source of this LED floodlight cannot be replaced. If the light source needs to be replaced (e.g. at the end of its service life), the complete LED floodlight must be replaced.

5. Installation
Check all components for damage. Do not use the product if the LED floodlight is damaged. When installing the unit, make sure the installation site is not subject to vibration. Select appropriate site of installation, giving consideration to reach, motion detection and direction in which the LED floodlight is aimed.

6. Operation
The LED floodlight is not suitable for burglar alarm systems as it is not tamperproof in the manner prescribed for such systems. Weather conditions may affect the way the LED floodlight works. Strong gusts of wind, snow, rain and hail may cause the light to come ON when it is not wanted because the sensor is unable to distinguish between sudden changes in temperature and sources of heat.

7. Cleaning and Maintenance
The unit requires no maintenance. Hazard from electrical power. Contact between water and live parts can result in electrical shock, burns or death. Only clean unit in a dry state. Risk of damage to property! Using the wrong detergent can damage the light. Clean unit with a moist cloth without detergent.

8. Disposal
Electrical and electronic equipment, accessories and packaging must be recycled in an environmentally compatible manner. Do not dispose of electrical and electronic equipment as domestic waste. EU countries only: Under the current European Directive on Waste Electrical and Electronic Equipment and its implementation in national law, electrical and electronic equipment no longer suitable for use must be collected separately and recycled in an environmentally compatible manner.
Manufacturer information
Manufacturer
STEINEL GmbH
Dieselstraße 80-84
33442 Herzebrock-Clarholz
Germany
product@steinel.de