• STEINEL Hallway COM1 - in-ceiling installation
  • STEINEL Hallway COM1 - in-ceiling installation
  • STEINEL Hallway COM1 - in-ceiling installation
  • STEINEL Hallway COM1 - in-ceiling installation

Presence detector - Professional Line

Hallway

Presence detector - Professional Line

Hallway COM1 - in-ceiling installation

EAN 4007841086497
  • Perfect radial detection with a range of up to 25 m, ideal for long corridors and hallways
  • Customisable range that can be set individually in both direc
  • Control PRO II design for a modern and functional look that enables versatile applications
  • Bluetooth technology for simple connection and control via Bluetooth
  • Multiple interfaces, compatible with COM1, COM2, DALI-2 APC, DALI-2 IPD, KNX, IP and BT IPD
  • External light measurement required for black sensors that can be integrated via Bluetooth or KNX
  • You're watching:
    The specialist for long hallways and aisles.
  •  
    The specialist for long hallways and aisles.
The specialist for long hallways and aisles.

Designed to match the Control PRO II family, the Hallway presence detector leaves a visibly lasting impression in modern buildings. Providing a detection zone of 25 x 3 m, it guarantees a fast switching response. Ideal for use in long hallways and corridors. Bluetooth takes the effort out of setting them up, putting them into operation and interconnecting them.

Technical Specifications
Quick overview
Download datasheet
Application, place
Indoors
Installation
In-ceiling installation
Detection angle
360 °
Reach, tangential
25 x 3 m (75 m²)
Mounting height max.
4,00 m
Interconnection via
Bluetooth Mesh
Version
COM1 - in-ceiling installation
Article number
086497
PU1, net weight
0,207 kg
image/svg+xml 103 103 67
max. 25 x 3 m
max. 2000 W
IP20
2 - 2000 lux
5 sec - 60 min
2 - 12 m
IQ-mode
Teach mode
connectable via bluetooth

General

Dimensions (L x W x H)
105 x 103 x 103 mm
With motion detector
Yes
Manufacturer's Warranty
5 years
Settings via
Bluetooth Mesh
With remote control
No
Version
COM1 - in-ceiling installation
PU1, EAN
4007841086497
Type
Presence detector
Application, place
Indoors
Application, room
Indoors, corridor / aisle
Colour
white
Colour, RAL
9003

Fixation/ mounting

Includes corner wall mount
No
Installation site
ceiling
Installation
In-ceiling installation, Ceiling

Housing

IP-rating
IP20
Ambient temperature
from -20 up to 50 °C
Material
Plastic

Electrical equipement

Mains power supply
220 – 240 V / 50 – 60 Hz
Switching output 1, resistive
2000 W
Switching output 1, number of LEDs / fluorescent lamps
8 pcs.
Switching output 1, floating
No
Switching output 1, low-voltage halogen lamps
2000 VA
Power consumption
1 W

General information

Article number
086497
European Article Number (EAN)
4007841086497
Detection angle
Aisle, 360 °
Angle of aperture
160 °
Transmitter power
< 1 mW

Sensor technology

Technology, sensors
High frequency, Light sensor
Mounting height
2 – 4 m
Mounting height max.
4,00 m
Optimum mounting height
2,8 m
HF-system
5,8 GHz
Detection
also through glass, wood and stud walls
Sneak-by guard
Yes
Capability of masking out individual segments
No
Electronic scalability
Yes
Mechanical scalability
No
Reach, radial
25 x 3 m (75 m²)
Reach, tangential
25 x 3 m (75 m²)

Functions

Functions
Group parameterisation, Semi-/fully automatic, Lighting scenario, Manual ON / ON-OFF, Neighbouring group function, Normal / test mode
Twilight setting
2 – 2000 lx
Time setting
10 s – 60 Min.
Basic light level function
No
Main light adjustable
Yes
Twilight setting TEACH
Yes
Constant-lighting control
No

Connection

Interconnection
Yes
Interconnection via
Bluetooth Mesh

General information

Product category
Presence detector
Product Details
  • Image
    UV-resistant plastic
  • Image
    Interconnectable and adjustable via Bluetooth
Downloads
Safety and Warning Instructions
1. Important Product Information
Please read carefully and keep in a safe place. – Under copyright. Reproduction either in whole or in part only with our consent.

2. General Safety Precautions
Risk of electric shock! 230 V means danger to life! Disconnect the power supply before attempting any work on the product. During installation, the electric power cable being connected may not be live. Therefore, switch off the power first and use a voltage tester to make sure the wiring is off-circuit. Installing the sensor involves work on the mains power supply. This work must therefore be carried out professionally in accordance with national wiring regulations and electrical operating conditions. (e.g. DE - VDE 0100, AT - ÖVE / ÖNORM E8001-1, CH - SEV 1000) For products with COM2 port: connection B1, B2 is a switching contact for low-energy circuits. This must be fuse-protected in line with the technical specifications. Only electronic ballasts with a floating control signal may be used at the DIM 1 to 10 V control output. No mains voltage may be connected to control output/input DA+ / DA-. Only use genuine replacement parts. Repairs may only be made by specialist workshops.

3. Proper Use
The use for which the sensor version is intended is described in the relevant general operating instructions. The general operating instructions can be opened by using the QR code from the Quick Start provided.

4. Electrical Connection
Important: incorrectly wired connections will produce a short circuit later on in the product or fuse box. In this case, you must identify the individual cables and re-connect them. An appropriate mains switch for switching ON and OFF can be installed in the mains lead.

5. Installation
Check all components for damage. Do not use the product if it is damaged. When installing the product, make sure the installation site is not subject to vibration. Select an appropriate mounting location, taking the reach and motion detection into consideration.

6. Cleaning and Maintenance
The product requires no maintenance. Hazard from electrical power. Contact between water and live parts can result in electrical shock, burns or death. Only clean the product in a dry state. Risk of damage to property! Using the wrong detergent can damage the product. Clean product with a moist cloth without detergent.

7. Disposal
Electrical and electronic equipment, accessories and packaging must be recycled in an environmentally compatible manner. Do not dispose of electrical and electronic equipment as domestic waste. EU countries only: Under the current European Directive on Waste Electrical and Electronic Equipment and its implementation in national law, electrical and electronic equipment no longer suitable for use must be collected separately and recycled in an environmentally compatible manner.
Manufacturer information
Manufacturer
STEINEL GmbH
Dieselstraße 80-84
33442 Herzebrock-Clarholz
Germany
product@steinel.de